The refrigeration cars on your train keep experiencing electrical power drops, causing employees to become trapped in a pitch-black ice box! You try to put a standard emergency ballast in the cars vaportight T12 fixtures, and within days the battery ruptured. Buddy, you need an extended temperature 2 bulb 1200 lumen emergency ballast.
Bodines B50 features a battery warmer that maintains the internal Ni-Cd battery inside at a nominal 32° fahrenheit even when ambient temperatures dip into the negatives. The case and circuitry are applied with safeguards that earn the emergency battery pack a UL Damp Location rating. For freezing cold environments where moisture and freezing are typical, accept no substitutes.
Features
- Ballast Type: Emergency
- Lamp Wattage: 32-215W
- Dual voltage 120/277 inputs, 60Hz cycles
- Operates: One or two 4-8ft T8, T10 or T12 linear fluorescent or 4-pin long CFLs
- Lumens (at 10-feet): 1200 lm
- UL 924 listed
- Min/Max Temp: -4° to 131°F
- Includes LED charging indicator
- 5-years full warranty
Application
Once you install Bodines fluorescent emergency battery pack, you'll be saving yourself a lot f time, money and heartache. It includes a sealed LED battery indicator and test switch that is visible from the outside of the fixture. It will flash whenever the battery is in charging mode or if a fault is detected in the charging current.
External Specifications
The ColdPack comes in a polished red metal case that protects the circuitry and qualifies its Damp Location rating. The device can be installed in freezers and inside sealed outdoor cold location fixtures. It has a surprisingly low shipping weight of less than 4 lbs, so it will not weigh down the fixture it is installed to.
Electrical Specifications
- Lamp wattage: 17-215W
- Input Wattage: 14W
- Input current: 280mA
- Dual-tap 120 or 277vAC, 60 Hz
- AC current: 240 mA
- Initial illumination: 300-700 (depending on lamp)
- Battery: Hi temp nickel cadmium. 7-10 year lifespan
- Emergency runtime: +90 minutes
- Recharge time: 24 hours or less
- Includes illuminated LED diagnostic switch for UL testing
Dimensions
- Width: 13.3"
- Depth: 2.4"
- Height: 1.5"
- Mounting center: 12.8"
Compliance
- Tested to UL924 standards for Emergency Lighting & Power Equipment
- CSA C22.2 No. 141 certified (as an option)
- NEC Installation standards
- Meets NFPA: 101 Life Safety Code, excerpt 5-9.3 periodic testing standards
- National Fire Code
- National Building Code