Dear Customer:
Lightolier's entire emergency ballast line is now OBSOLETE. Please contact (800) 887-9957 to find an equivalent solution.
Are you worried about backup lighting during a power failure? Your search is over because we are presenting FBPF50T emergency ballast from Lightolier!
When AC power fails, the FBPF50T goes into the emergency mode and operates one bulb for a minimum of 90 minutes. When AC power comes back, the battery unit goes back to sleep and recharges in less than 24 hours.
Features
- 1400 lumen maximum output.
- Operates 18-57 W 4-pin twin, quad, and triple tube CFLs
- Energy efficient
- Min/Max Temp: 5°F (-15°C)/131°F (55°C)
- Recharges in 24 Hours
- Dual Tap Voltages: 120/277 vAC, 60 Hz
Application
The FBPF50T may be installed inside or on top of the CFL fixture. If a switched fixture is used, an un-switched live wire must be connected to the emergency ballast. The unit will feed from the same electrical circuit branch as your normal lighting.
External Specifications
20 gauge steel with a high temperature powder coat paint finish is used for FBPF50T housing. Slim housing permits for housing frame mounting on most lower-level luminaries.
Electrical Specifications
- 3.5 Watt max. operation
- Recharge Time: 24 Hours
- Two Operating Voltages: 120/277 VAC,
- 60 Hz cycles
- High temperature nickel cadmium (ni-cd) battery included
Dimensions
- Width: 21.5”
- Depth: 1.18”
- Height: 1.18”
Compliance
- UL 924 Listed
- NFPA 70
- NFPA 101
- N.E.C.
- BOCA
- OSHA
- IEC 61951-1
- IBC